How To Properly Replace The HQ9 Blades On Your Norelco Shaver
How to Replace Philips Norelco HQ8 / HQ9 Shaver Blades
Philips Norelco HQ9 SpeedXL Replacement Heads
philips norelco hq9 speedxl replacement heads
SmartTouchXL: Philips Norelco HQ9 SpeedXL/NZ Replacement Shaving/Razor Heads/Blade
Philips Norelco (Older Models) Shaver Heads Replacement Tutorial
Philips Norelco HQ9 SpeedXL Replacement Heads Review
Philips Norelco HQ9 SpeedXL Replacement Heads
Sharpening The Razor – Part 1
Philips HQ9 Shaving Heads Close Look
Amazon Price: $23.33 $23.33 (as of February 24, 2018 12:04 am –
Philips Norelco HQ9 Replacement Heads provide a comfortable electric shave. These replacement heads offer three shaving tracks with a large surface area for a fast, close shave. The flexing heads keep the shaving surface in close contact with your skin for a fast and efficient shave.
Triple-Track Shaving Heads
Super Lift & Cut Technology
HQ9 Replacement HeadsThree shaving tracks for 50 percent more shaving surface for a close and fast shaveSuper Lift and Cut action lifts hairs to cut below skin level for a closer shaveSlots and holes catch both long hair and short stubble for even shaveLow-friction SkinGlide surface slides smoothly over skinReplace your shaving head every year for best results
The HQ9 replacement heads offer three shaving tracks to cover more skin surface for a fast, close shave.
Replace the shaving heads
every year for best results.
Philips Norelco HQ9 replacement heads are compatible with the following Philips Norelco models: 8100 series, 8200 series, 9100 series, and PT/AT900 series. If you do not see your model listed here, use the compatibility tool to determine the correct replacement head for your shaver.
Triple Track for More Shaving Surface
TripleTrack heads with 3 shaving tracks cover 50 percent more skin surface at a time for a close and fast shave.
Super Lift and Cut Technology Provides a Close Shave
The replacement heads are equipped with the patented Super Lift and Cut System, which is designed to give you a close and comfortable shave as the first blade lifts while the second blade cuts comfortably below skin level.
Low Friction SkinGlide Surface for an Extra Smooth Shave
The low-friction SkinGlide shaving surface slides smoothly along your skin for a close, easy shave.
Replace Every Year for Best Results
Replace the shaving heads every year to keep your shaves close and comfortable. The shaving blades are easy to replace.Switch off the razor and disconnect it from the power outlet.Press the release button to open the shaving unit.Turn the lock anticlockwise (1) and remove the retaining frame (2).Remove the shaving heads and place new ones in the shaving unit.Make sure that the projections of the shaving heads fit exactly into the recesses.Put the retaining frame back into the shaving unit and turn the lock clockwise.Close the shaving unit until you hear a click.
Note: If the shaving unit does not close smoothly, check if you have inserted the shaving heads properly and if the retaining frame is locked.
What's in the Box
Three Philips Norelco HQ9 replacement heads.
Philips Norelco Replacement Heads Compatibility Chart
81__ series82__ series91__ seriesPT/AT 9__ series
HS80__ seriesHS84__ series
71__ series72__ series73__ series77__ series
780088__ seriesPT/AT 7__ seriesPT/AT 8__ series
HQ200 Jet Clean Solution
For use with
Jet Clean systems
- Product Dimensions: 0.2 x 4.2 x 5.2 inches ; 0.3 ounces
- Shipping Weight: 0.8 ounces
- Domestic Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
- International Shipping: This item can be shipped to select countries outside of the U.S. Learn More
- ASIN: B0009MFUPO
- UPC: 885376818004 787461534380 075020000743 881312392225 075020209306 798256457074 884423607615 794628257617 885161723902 075020018465 885781065833 885376935008 021466324332
- Item model number: HQ9
Expensive but last almost a year and work very well
2 people found this helpful.
10 years ago when I bought my first SpeedXL replacement HQ9 blades, I put an index card in the medicine cabinet with the date I replaced the blades last. I have replaced them every 10-14 months since, and always with Norelco HQ9 heads. I’ll say that every year it’s like night and day when I replace them. Honestly I probably should do it every 9 months because the cut quality is SO much better with new heads. I’ll keep buying these until the shaver dies. I’ve been impressed it’s lasted almost 10 years so far with no issues.
Just like new shaver with these!
14 people found this helpful.
Like many other people, I vacillated between purchasing new shaver heads or just buying a new shaver. I just bought a new shaver for a gift that cost about half of what these heads cost! But in the end I bought these for my 9160xl that has been a great shaver since its purchase in 2007. I think this is the second set of replacement heads in that nine year period! My shaver was getting a bit noisier recently and I noticed I had to make more passes while shaving to do the same job. I thought maybe the motor was to blame but I was wrong as when I put in these new blades and foils, the shaver immediately quieted down and my shave was very quickly done. Noticed the new blades were a bit harsh on my skin, but then I remembered that it takes around three weeks for the blades to break in to a persons face. Even though my skin was a bit irritated, the shave itself was extremely close and blade smooth. Norelco is the best shaver for me, with these blades also being the best for me (I’ve tried hq8, comfort cut, and hq56 super lift and cut, to mention only some).
Good blades but understand that this product is ONLY the 3 blades, and not a "head".
2 people found this helpful.
Unit worked as promised and the price was a lot cheaper than getting it in the store. It was retail packaging. My only issue – which was really my fault – was assuming that the assembly inside the watch (which holds the blades) was included. In fact, what you get is just the 3 round rotating blades. What happened to my razor was that the internal assembly that holds the blades in place broke, so I decided to replace the entire unit. Again, likely my fault for not making sure I was getting what I needed (the internal assembly and the blades). But, I continued to use the broken assembly and the blades worked very nicely and gave a clean, close shave.
Happy to get new life out of my electric razor again with these new replacement heads.
Exact fit to replace my old ones… and what a difference. I waited too long to replace them, forgot how dull they were. It had almost been 3 years! I wouldn’t go that long, but they did hold up. The company recommends every 12 months. Shaving just takes longer as the blades dull. It’s nice to shave quicker again and smoother too. Happy to get new life out of my electric razor again with these new replacement heads.
I am very well pleased : )
30 people found this helpful.
I should have change the shaver head a lot sooner, it made the world of a difference, in the time and quality of the shave. So I guess I can say that sometimes being frugal can come back to bite you, and this was one of those times. Let me explain, I wanted to be sure that I was not wasting money replacing the head of my shaver to soon. The only problem with this is that as the shaver head gradually wears down, it is hard to notice that it is taking longer and more passes to get a good shave.
Makes your old razor like new again
A couple of years ago, I bought my husband a new Norelco Sensotouch razor to replace his old razor. First, the charging stand on the new razor wouldn’t work, so he ended up using the cord from his old razor to charge the new one. Then, right after the warranty had expired, the new razor wouldn’t turn on at all. Fortunately, he still had the old razor. I ordered these replacement heads, he popped them into the old razor, and it’s working good as new again! That’s what I should have done in the first place!
Just what my shaver and me needed
One person found this helpful.
I have been using my norelco shaver for eight years. I replace the heads every year just like the book says too, and because my face gets more irretated if as I get close to the end of the year, the shave usn’t as smooth. After installing these new heads the smooth shave is back and the irretation is down.